Middle East · en-ir
Industrial Fasteners Manufacturer, Wholesaler, Supplier & Exporter to Iran
Global Fasteners Exports supplies wholesalers, distributors, and OEM buyers in Iran with industrial fasteners across our full catalog — bolts, nuts, screws, washers, rivets, and structural hardware — manufactured or sourced to the standard your project specifies (DIN, ISO, ASTM, or BIS), with export documentation and container shipping handled end-to-end.
26
Fastener Product Categories
104
Trade Roles Covered
FCL & LCL
Container Shipping Options
Iran at a glance
- Region
- Middle East
- Capital
- Tehran
- Population
- 92 million
- Local currency
- Iranian rial (IRR)
- Languages
- Persian
- Time zone
- Asia/Tehran (UTC+03:30), 2 h behind India
- Indicative sea transit from India
- about 4–12 days
Population, capital, currency, and languages from Wikidata (checked 2026-09-23); time zones from the IANA tz database. Duty and tax rates change and transit depends on carrier, routing, and port congestion, so figures marked indicative are confirmed against your product and destination port when we quote. Your customs broker should verify final landed cost.
Trade & Shipping Notes
- • Fasteners are typically classified under HS Chapter 73 for import into Iran — confirm the exact HS subheading and current duty rate with your customs broker.
- • We supply mill test certificates and export documentation (commercial invoice, packing list, certificate of origin) for customs clearance.
- • Both FCL (full container load) and LCL (less than container load) shipping are available depending on order volume.
Why Buy From Us
Manufacturer, wholesaler, supplier, and exporter for Iran
How we deliver to Iran, role by role.
Manufacturer in Iran
We manufacture Self-Tapping Screws, Sheet Metal Screws and Machine Screws to ASTM and DIN/ISO, with project-specific documentation for EPC work. Every batch is inspected for dimensions, material, and mechanical properties before it is packed, and mill test certificates can be supplied so your inspector in Iran can sign off.
Wholesaler in Iran
Buyers in Iran can order at volume pricing across mixed sizes and grades. You do not need a full container: partial-container (LCL) orders run under Hurain Engitech & Trade, so a distributor testing Iran demand can start small and scale to full container loads.
Supplier in Iran
That kind of demand rewards a dependable source, so we set up repeat supply against one agreed specification: same standard, grade, finish, and packing on every shipment to Iran.
Exporter in Iran
We handle the commercial invoice, packing list, certificate of origin, and HS-code classification, and quote FOB, CFR, or CIF to your nearest port. Your customs broker in Iran confirms the final landed cost.
Step 1
Confirm the specification
Send product, standard, grade, finish, and quantity for Iran. We confirm feasibility, MOQ, and lead time.
Step 2
Manufacture or pick from stock
Common sizes of Self-Tapping Screws and Sheet Metal Screws ship from ready stock; special grades and custom parts are produced against a first-article sample.
Step 3
Inspect and pack for sea freight
Batch inspection, corrosion-protected export packing, and labeling that matches your purchase order.
Step 4
Book the container and finish documents
Payment is 50% in advance and 50% before dispatch, once all export documents are complete.
Step 5
Ship to Iran
Indicative sea transit from India is about 4–12 days. We stay on the shipment through customs handover.
Industries
Industries we supply in Iran
Chosen from what drives fastener demand in Iran, not a generic list. Trade context for every industry below: indicative sea transit from India about 4–12 days.
Automotive in Iran
Why it matters here: Global Fasteners Exports supplies wholesalers, distributors, and OEM buyers in Iran with industrial fasteners across our full catalog — bolts, nuts, screws, washers, rivets, and structural hardware — manufactured or sourced to the standard your project specifies (DIN, ISO, ASTM, or BIS), with export documentation and container shipping handled end-to-end.
What buyers need: High-tensile grade 8.8/10.9 bolts for chassis and suspension.
We supply to Iran: Hex Bolts, Flange Bolts & Flange Nuts, Nylon Insert Lock Nuts.
Where We Help
Fasteners we lead with in Iran
Self-Tapping Screws in Iran
The distinction between self-tapping and self-drilling trips up more first-time buyers than almost any other spec in this catalog. Self-tapping screws form threads into a pre-existing hole and rely on the installer (or a pre-drilling step) to get that hole right; self-drilling screws carry their own drill-point tip and skip the pre-drilling step entirely, at the cost of a slightly more expensive part. Ordering the wrong one for the job either wastes the drill-point cost or leaves installers drilling holes that should have been unnecessary.
Common use: Hex washer head screws with bonded EPDM washers for weatherproof sheet fastening.
Container quantity (approx.): A standard 20ft container (~20 tons) typically holds several million pieces of self-tapping screws in common sizes. Exact quantity depends on length, diameter, and head style, and is confirmed at quote time.
Sheet Metal Screws in Iran
Sheet metal screws overlap heavily with self-tapping screws in the catalog sense, but buyers sourcing at volume for HVAC or automotive trim work tend to specify by head style and drive type first, material gauge second — because on a production line, a driver bit change costs more time than most people expect, and standardizing drive type across an entire assembly reduces tooling changeovers.
Common use: Fast fastening of sheet metal ducting, cabinets, and enclosures.
Container quantity (approx.): A standard 20ft container (~20 tons) typically holds several million pieces of sheet metal screws in common sizes. Exact quantity depends on length and gauge and is confirmed at quote time.
Machine Screws in Iran
Machine screws sit in an odd middle ground buyers sometimes overlook: too small to be treated with the same rigor as a structural bolt, but precise enough that a mismatched drive type or head style can hold up an entire assembly line. Electronics and appliance manufacturers in particular tend to standardize on one or two head/drive combinations across a whole product line specifically to avoid stocking dozens of near-identical small parts.
Common use: Small pan or countersunk screws securing PCB mounts, covers, and housings.
Container quantity (approx.): Machine screws are small and light, so a standard 20ft container (~20 tons) typically holds several million to over ten million pieces in common sizes — exact quantity depends heavily on length and diameter and is confirmed at quote time.
The Challenge
What buyers run into in Iran
Unpredictable lead times
Unclear ready-stock-versus-manufacture status is a common source of missed schedules for Iran buyers working against a fixed project or install date.
Container consolidation confusion
Not knowing whether an order qualifies for FCL or should be consolidated as LCL leads to either overpaying for empty container space or delaying shipment waiting to fill one.
Customs documentation gaps
Missing or incorrect commercial invoices, packing lists, or certificates of origin are a routine cause of customs delays at the destination port.
How We Solve It
Our approach for Iran orders
Clear stock-vs-production quoting
Every quote states whether the order ships from ready stock or requires production time, so lead-time expectations are set upfront.
FCL/LCL guidance
We recommend FCL or LCL based on your actual order volume rather than defaulting to whichever is easier for us to arrange.
Complete export documentation
Every shipment includes a commercial invoice, packing list, and certificate of origin, plus mill test certificates where required.
Trade Roles
How we serve Iran as manufacturer, wholesaler, supplier & exporter
Our Standard
What every Iran order includes
Dimensional inspection
Thread gauge, length, diameter, and head/drive geometry checked against the specified standard.
Material verification
Grade and material composition confirmed against the order specification, with mill test certificates on request.
Mechanical testing
Tensile strength, hardness, and proof-load testing on sample batches, particularly for structural and high-tensile grades.
Finish & coating check
Plating thickness, galvanizing coverage, or passivation quality inspected before packing.
Process
How ordering for Iran works
- 1
Send your requirement
Product, grade/standard, quantity, and your preferred Incoterm (FOB/CIF/CFR).
- 2
Receive a quote
We confirm price, lead time, and MOQ based on ready stock or manufacturing time.
- 3
Sample & confirm (optional)
For new buyers, we can arrange samples before the full order is confirmed.
- 4
Production, QC & shipping
Manufacturing or sourcing, batch inspection, export documentation, and container loading.
You don't need a full container to order. Hurain Engitech & Trade — the group Global Fasteners Exports operates under — regularly ships smaller, partial-container (LCL) orders of just a few pallets or boxes for buyers who don't yet need FCL volume, consolidated with other cargo to keep freight cost reasonable.
Not sure which Incoterm to choose? Read our FOB vs CIF vs CFR guide.
FAQ
Iran — frequently asked questions
Request a quote for Iran
Send your product list, quantities, and destination port for a quote within 1-2 business days.